1998 Subaru Legacy "upper end lower knock" Questions

...upper bolt is 14mm, the lower nut (which goes on a stud that stays in place) is 17mm. You will need several different size socket-wrench extensions (I used two 3" extensions on bottom and one on top) ...

...end. i had the same problem. had a knocking on the engine and let the vehicle sit until i had time to look for the problem. my unknowing mom took the car without permission and the car broke down on ...

...upper end of engine if lifters are making noise could be from a bad valve,bad lifter ,push rod ,oil pressure,rocker arm - need to take do compression test find out if valve problem and which cylinder ...

...Upper Control Arms, Lower Ball Joints, Tie Rod Ends, inner and outer, Anti-Sway bar end connectors. Actually found one of those broken, thought that was the knock, but wasn't. And just recently, ...

...physical damage to the upper end. Any further attempt to start or run the engine at this point without a proper diagnosis could caus efurther damage. Did the eng stop running after the smoke was

...lower and upper control arms and stabiliser links and there ha Knocking sound coming from the dashboard area when driving over bumpy surfaces.Noise irritating as if panels are knocking on one ...

...end for years now been throught 3 mot's and passed no problem been told the knocking may be the shock absorbers i have grabed hold and there is movment if i shake it back and forth how much play ...

...end makes a knocking sound .I replaced upper lower ball joints,sway bar bushings, wheel hub barings, shocks ,bolts, rotors, brake pads, please could you help me out what could it be Try replacing the ...

...end hitting bumps, I have checked both tie rods, upper and lower ball joints, all rubber bushings and both sway bar links.. All is ok but very little play with inner tie rod passenger side, to me the ...

...end how to replace front link pins in 2001 Chrysler grand voyager Links are easy but getting old ones off is the hardest part. Wheels off and soak 2 nuts on each side upper and lower, and let sit 1/2 ...