1998 Subaru Legacy "plug wire resistance reading" Questions

Ad

...subaru legacy outback Have DTC Code PO101, a miss fire in cylinder #1. I have inspected the spark plugs but all are in good condition. A tune up was done approx. 30k miles ago. The fuel filter was ...

Ad

Question about Subaru Legacy

1 Answer

...low resistance, and that wire should be replaced.Read more: How to Test a Spark Plug Wire on a Car | ...

Ad

plug wire using a suitable spark plug tester. Ground the companion cylinder spark plug wire of each cylinder when it is tested. If a strong bright blue spark is present on all of the cylinders, remove

...voltage for the coil. Need to unplug the electrical connection not the plug wire and measure the resistance there and see if you have the 9 ohms of resistance. If you do not then replace the

...Resistance in your plug wires and plugs will burn a hole through the rotor button take it off and flip it upside down to check Or maybe the cwenter of the rotor under the metal tab is burned through ...

Question about Subaru Legacy

1 Answer

Surprisingly, a coil with high resistance may still fire the spark plug, but the voltage produced will be higher because the current must jump the open wiring in addition to jumping the spark plug gap

...wire would be 12k ohms. Carbon spark plug wires measure about 10,000 ohms per foot when in good condition and the resistance increases over time. Leads can still be quite functional with measurements ...

...coilpack so I know it not that Either the plug wires are worn or the plugs themselves. What are your resistance readings on the coil packs & ignition wires? What condition are the spark plugs

wire running to it. to check sending unit in the tank, locate the closest wiring harness plug (in the trunk/or under car) and disconnect then check gauge reading,remember ignition must be on. try that

Question about Subaru Legacy

1 Answer

...no fuel in the tank the resistance should only read around +- 5 also there is a plug just in front of the tank where the pump assembly plugs into you can check resistance there instead of dropping ...

Not finding what you are looking for?
1998 Subaru Legacy Logo

429 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...