1998 Subaru Legacy "brake light bulb" Questions

...brake light is working Are my bulbs bad, sockets bad, or do I have a wiring issue? Do the brake and tail lights both run from the same bulb? Hi,So, both sides are not working? Check for voltage @ the ...

...why the warning light stays on? (this is not the parking brake inicator) Your brake light is out. Check brake lights and repl. burnt light bulb . Did you check the bulbs at the rear? One is burnt

Push in the brake pedal and the parking lights come on Has anyone replace a light bulb? if so I suspect the wrong bulb was installed so check all of the brake light bulbs.

...brake light switch on the pedal... it should look like below: You can unplug the switch and close the circuit of the wiring harness with a little pigtail of scrap wire and if the brake lights then ...

Rear brake light aren't working subaru legacy 2004 Rear brake light aren't working subaru legacy 2004 Check the bulbs, if they are OK you may have a faulty brake light switch.

...brake light to stay on only when headlights are on I had a cop stop me and tell me one brake light was stuck on. But it only happens with the head lights or parking lights are on. Otherwise the brake ...

...brake light bulb in a 1991 Subaru Legacy How do you tak e the beake cover off to change the bulbe, I don't want to brake anything. If this is a sedan, open the trunk and remove the bulb bracket for ...

...brake light switch? PS: this legacy has cruise control, so the BL switch manages that, too. simple test light to the stop light switch mounted just above the brake pedal. power in one side push down ...

...brake light comes on but the reverse light does not. If it is in the same spot then it would be a 2 part bulb and one filament has burned out so the bulb still needs replaced. If it not the bulb then ...

...brake light switch is good The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light ...