...the engine 2004 Subaru Legacy ? See if the engine turns over by putting a socket and ratchet on front bolt that hold the pully on. May have to have starter motor checked out if the motor turns
...starter motor in .is it easy to take it out and put back in?if it is easy how do i go about taking it out Most starters are held in place by 3 bolts ant one or two wires u have to take the ground ...
starter motor for my subaru gt legacy 97 but its still not starting or winding over, is it the relay?? yes ! there might not be a relay if not you may need to fit one to ensure the starter solonoid is
...starter motor, or on either end of cables. Id look there before swapping out starter.On cold days you might put a heater under car for a few hours before using it,do this carefully as to avoid a car ...
starter motor to activate putting it simply. try giving it a good knock with something solid while you start it ( you might need someone else to give you a hand).if it does not work then you are going
starter motor. my arms are too big to reach up to it from underneath the car. The easiest wy I have found with mine is to undo all the mounting blots and release all the non fluid hose clamps. you can
...starter motor-Subaru Legacy Finding/Replacing 1998 Legacy StarterTo find the starter on any car, follow the heavy lead from the positive terminal on the battery. A dedicated cable will connect to the ...
...putting these points of contact back in top shape makes a huge difference in power delivery, & charging capacity (read: life span) for the heart of the electrical system: the battery. I would start ...
battery keeps draining but tests good and is only 2 yrs. old. alternator and starter also test good.i charge battery and will run for the day then dies overnight.someone mentioned a loose belt? would ...
558 questions posted
Usually answered in minutes!
447 Questions
381 Questions
317 Questions
328 Questions
291 Questions