1996 Subaru Legacy "front axles" Questions

Ad

replacing the front axle on a 93 subaru legacy I need to replace the driver's side front axle on my 93 legacy. The last time I tried, I could not separate the axle from the hub assembly. What type of ...

Ad

how to remove front axle of a 1991 subaru legacy there is a roll pin which holds axle to trans remove this but be sure to put new axle in so you can see throught hole where pin goes it is not centered

Ad

Question about Subaru Legacy

1 Answer

...front cv axles my car when driving it and turnig the wheel. it clicks really loud and also sometimes it feels like its jerking and grabbing like its gonna lock up on me. First thing to have checked ...

Question about Subaru Legacy

2 Answers

front axles on a 1996 subaru legacy how do change them remove wheel > remove lower control arm bolt > revmove large hub axle nut (160 ft/lbs)>remove,drive out roll pin at tramsmission doj ...

Question about Subaru Legacy

1 Answer

...axles from the diff Since yours is front wheel drive, simply detach the diff from the chassis. Open up the diff which consists of two halves.The transmission axe has a spider bearing assembly held by ...

Question about Subaru Legacy

1 Answer

removing front rotar cannot remove front rotar to replace studs. 1991 Subaru Legacy rotar doesn't contain the studs, the plate/hub behind the rotar does - you need a 32mm socket to undo the axle nut ...

loud noise in front/side. When make a sharp turn There is a loud humming noise coming from front left side. When I turn around, back up, or make a sharp turn, the car loses a lot of power. most likely

Question about Subaru Legacy

3 Answers

...front cv rubber I want to know how to change the inside cv rubber. I have removed the wheel bearing assembly and am left with the drive shaft assembly hanging including the inside and outside rubbers ...

I have a 1991 Subaru Legacy right hand drive wagon. I put in a new front axle assembly and I still have a knocking sound. Everything I have read with that sound says it is the cv joint. Someone told ...

Question about Subaru Legacy

1 Answer

...is reassemble it all. Also when doing this, make sure you support the car by the body, behind the front wheel under the fender/door area. you will need to let the lower controal arm hang to do

Not finding what you are looking for?
1996 Subaru Legacy Logo

522 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...