1998 Mercury Villager "fuel sensor" Questions

Ad

Question about Mercury Villager

1 Answer

fuel temperature/sensor i need to know where the fuel temperature/pressure sensor is located on my 1999 mercury villager. thank you all soo much. go here for villager help ...

Ad

...fuel pump, a module, or a crank sensor. As long as the van is sitting still and just running it doesn't cut of . just when you are driving it cuts off. sometimes it will crank right back up and go ...

Ad

Question about Mercury Villager

1 Answer

...Sensor Bank 1 circuit poor electrical connection - Faulty Rear Heated Oxygen Sensor Bank 1 - Inappropriate fuel pressure - Faulty fuel injectors - Intake air leaks may be faulty - Exhaust gas ...

Question about Mercury Villager

1 Answer

...of DTC P0180? check engine light is on that is the code for the fuel temp sensor. The sensor is located on the fuel pump and it is available seperately. You have to remove the fuel pump to get to

Question about Mercury Villager

3 Answers

...fuel sensor MAF can be cleaned . There is also a few hoses running to the throttle body. be sure those has not perished due to the cold. Probably the fuel injectors need professionally cleaned. When ...

...fuel temp sensor---ECM code p 0325 refers to knock sensor (KS) 1 bank 1-- circuit malfunction===causes ---wiring---poor connection---KS as the codes vary to much and are not related , the first thing ...

...sensor, and make sure it's dry before reinstalling Inspect fuel lines for cracks, leaks, or pinches Check the fuel pressure at the fuel rail Check the fuel injectors, they may be dirty. Use fuel ...

Question about Mercury Villager

1 Answer

WHERE IS LOCATE MY FUEL TEMPERTURE SENSOR There is no such a thing as a "fuel temperature sensor" in your van

the throttle position sensor,and the fuel pressure. why did you replace the above items.did you put a fuel cleaner through the system try a good fuel cleaner and come back and tell me thanks.adrian,,,

Question about Mercury Villager

2 Answers

...sensor, fuel pressur regulator, wires, cap, rotor, plugs and pcv. Still same problem. Thinking I should remove fuel tank and clean it out then re install. This rig sat for two years befor Igot it so ...

Not finding what you are looking for?
1998 Mercury Villager Logo

424 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...