light on my 98 villager break lights won't go off somethimes, so I try to replace Breake light switch , now the breake light does not work at all. I did check fuse it is good. bulbs and good too . the
mercury villager 98 problem with break lights when i break the car do not turn on lights. Check the brake switch located above the brake pedal. There should be power on one wire all the time and power
Break light switch I replaced the lower break light switch on my 1998 Mercury Villager as the old switch would cause the break lights to stay on even after i stopped the vehicle running my the battery
1995 Mercury Villager shots down when i step on the break. 1995 mercury villager shots down sometimes when i step on the break and i have noticed the rpm meter drops very low whenever i turn a corner ...
...pressed, there is a switch under the dash on the brake pedal lever. The Drivers feet often move or break this switch and it needs repositioning or
...i have new brake pads and all brake system things what else do i need to change to get light or breaks to work again First --lets make it clear ,that since the beginning of time ,there are no ...
...break light anyone have a part number or name for it? higg mount stop lamp. above glass. Tail lamp/brake lamp/turn signal lamps on sides of liftgate. Lamp socket is name of harness. ebay go here too ...
...light on;back firesand misfires;no power.new plug wiresnew coil.new cap.new rotor Check for broken crank snout at crank pulley. If you replace a/c belt and overtighten it, it will break your ...
Question about Mercury Villager
headlights are off when I break the dash, rear lights and front parking lights go on also when the headlights are n the dash lights are also on but no break lights, what is wrong This usually means a ...
424 questions posted
Usually answered in minutes!
478 Questions
379 Questions
276 Questions
247 Questions
178 Questions