car jumped timing need to know how to reset mechanic was putting the timing belt back on and rotated it backwards. let me get back with you had to go work.
2.3 engine) back in time like its supposed to be. Please help What>>>>>>>>>>>>>>wish i could go back in time i wouldnt be sitting here lol need more input????
Question about Honda Accord
...time to change it You need to re-do it: take the belt back off. Now turn the crank counter clockwise, just a little, maybe 3 notches, to put all the pistons down just a bit in the block. Now set both ...
...back in time to do that make sure the #1 cylinder is top dead center of the compression strok then turn the cam gear till where its says up on the spoke is pointing up.after that put everything back ...
... Warm the car, find the timing marks using the light. Loosen the distributor and bump it forward or back, whichever corrects your timing. The honda has three timing marks. I found it useful to dab ...
Question about Honda Accord
clock stops. So when i go back in my car, the time is the same when i turned the car off. I tried switching fuses n that didn't wrk. PLEASE HELP ME!!!!!!! Have you checked the fuses in both fuse boxes
...back. john Take all the slack out of the long side of the belt and I like to use a pry bar to push against the tensioner and it'll take the rest of the slack out. Rotate the engine by hand twice ...
can any body help put cambelt back together car wont start due to timeing is out. everything around the engine is stil in good conditions nothing snapped or broken, valves under the rocket cover is ...
how do you put 1983 honda accord 1.8 back in time? with a time machine ask doctor emmet brown (back to the future)
...(96 accord v-tech) and light was on checked sensor connector it was tight cleared code hasnt come back on! Sometimes a bad connection will trigger a code like this, and it wont come back. Other ...
1,595 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions