1998 Honda Prelude "rough idle stalling low oil" Questions

...rough during idle and would stall on some occasions. I tried troubleshooting the sensors but failed so I ended up simply replacing the whole distributor. After the replacement, my civic ran perfect, ...

...starts rough idle will stay running if you give more gas rough idle when starting will stall if you don't give it the gas Check your oil! then check for fuel pressure.I bet you're low or out of

...idle modual it reves at the norm then all of a sudden the reves just increase up to roughly 2.300 and then come down to near stalling 1 have replaced crank angle cencer air flow cencer fuel injection ...

low. Added oil again. Now check engine light flashes going 30+ mph. Is idling rough like it's wants to stall. Help me please. you need to have engine checked and possibly rebuilt or replaced, this not

...idle rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can ...

...idle is running rough enough to stall out which is odd for an automatic i think. I checked the dipstick and there is no froth as if it were areated by the crankshaft. What to do and where to start on ...

...rough idling and trying to stall The engine management light has now come on the engine keeps dipping when idling at a junction or such like and nealy stalls, it's 2004 low mileage 32k ...

...rough and periodically stalling. I replaced the fuel filter and freshened up my K&N filter with a filter charge kit. It idles smoother now, but still low (500 rpm's) and still stalls. I'm at a ...

...rough idle. It gets worse after the engine gets to operating temperature, and when I put the vehicle in reverse or drive and let off the throttle the rpm will drop super low and typically stall. When ...

now he wont answer my calls....... egr valve causes rough idling and stalling problems.check engine oil level could have low oil pressure.have vechicle code scan could have bad knock sensor.