2004 Volvo S40 "time cams 1" Questions

Question about Volvo S40

2001 Volvo S40: The car had the timing belt

...time starting, stumbles, idles up and down and then smooths out. The cam shaft on the exhaust with varibal timing gear is out of alignment with the cam lobs on the exhaust stroke on #1. Both the ...

Question about Volvo S40

1 Answer

I am asking for position of the camlobs when timing without using marks

Cams are set with the #1 piston NOT AT TDC. You need the cam tool to set this. DO NOT EVEN TRY TO DO THIS WITHOUT IT. ther e are NO reference points which allow you to do this any other way. I am a 35

Question about Volvo S40

1 Answer

I did my cylinder head and put it back but my car is not starting i think i might have made wrong cam timing because its backfiring on the throttle its a volvo s40 2l engine need help fast

i did my cylinder head and put it back but my car is not starting i think i might have made wrong cam timing because its backfiring on the throttle its a volvo s40 2l engine need help fast Did you ...

Question about Volvo S40

3 Answers

We change the cambelt and something very wrong

...1 top dad cntr and s where your marks are, you are probably off a tooth somewhere the valves should be ok Are you changing it because it broke, or was it time to replace it. Its a simple job to line ...

Question about Volvo S40

1 Answer

Instruction changing timing belt 1979 Alfa Romeo Spider Veloz?

...cams), Then align the Intake Cam to mark on #1 Cam Cap, "Now" loosen the 17mm bolt to tighten timing chain, rotate engine using rachet two times, reset TDC at the crank, and look at "Cam Timing Marks ...

Question about Volvo S40

1 Answer

1998 toyota 2.2l, camshaft timing marks

1998 toyota 2.2l, camshaft timing marks first off its a timing belt second there is a yellow factory mark on only 1 cam and thats cause only 1 cam is driven by the belt the exhaust cam is gear driven ...

Question about Volvo S40

2 Answers

I need a diagram to sincronize the timing belt of

...in certain spot as well as timming mark on belt driven cam gear to cover this cam gear is a 3:1 ratio (3 turns of cam gear = 1 turn of cams) i am putting the timing belt un time but my car dont turn ...

Question about Cars & Trucks

1 Answer

Hi trying to set the timing on my j1 elantra its a 16 valve and each cam has two marks on it.so my question is what positions should the cam lobes be at when timing is supposed to be correct.thanks

...to open this is known as valve rock or valve overlap and occurs when the cam shaft is properly timed to the tdc position of the piston for a twin cam engine the cam lobes position will be the ...

Question about Volvo S40

1 Answer

99 ford contour 2.0 dohc timing belt

...away from valve. Then turn the cams clockwise or counter clockwise slow one at a time too the proper slot position for the tool to fit. Once the cam marks are lined up bring the #1 piston to its

Question about Dodge Cars & Trucks

1 Answer

2014 dodge journey sxt 3.6 timing chain diagram

2014 dodge journey sxt 3.6 timing chain diagram I need the timing chain diagram for a 2014 dodge journey sxt 3.6 /* override srp image link color and background color */ .galleryImage { ...