...Camshaft Position sensor tests for a loss of Camshaft Position sensor signal. Observe that as long as the Crankshaft Position sensor 24X signal is available, the engine will start. The PCM can ...
...crank shaft sensor throw all those codes out at wonce one or two but not all of them althow it could be a first But its one of these sensors and i would but on the cam shaft The crank shaft sensor is ...
...Sensor relearn procedure. The PCM relearns the crank target window spacing during Decel Fuel Shutoff mode The PCM reset step requires 3 closed throttle decelerations from 55 mph in order to relearn ...
Question about Cadillac Cars & Trucks
...camshaft positioning sensors ok take a deep breath. 2005 CADDY 4.6l first off I bet the alternator is dead. and with that all batteries go dead. too. (as they must) driving with the CHARGE lamp ...
...crank positioning sensor on a 8.1 liter chevy silvarado? Crankshaft Position Sensor: Service and Repair Crankshaft Position (CKP) Sensor Replacement REMOVAL PROCEDURE IMPORTANT: Care must be taken ...
...camshaft sensor, new plugs valve cover gasket got code of PO343 and PO740 code po740 refers to torque converter clutch(TCC) solenoid-circuit malfunction==causes --wiring--TCC solenoid-ECM/TCM code ...
Question about Volvo S80
...crank. I would first try the cam sensor due to the inexpensive cost of the part. I had a k1500 pickup that you could reset the computer and the truck would run fine for a month and then it would act ...
...sensor and camshaft position sensor. Replaced both. Cranks but won't start. Code 0341 came up indicating camshaft position sensor but also said something about the reluctor ring. Help what's my next ...
451 questions posted
Usually answered in minutes!
587 Questions
551 Questions
185 Questions
78 Questions
84 Questions