2000 Volvo V40 "turn upper tension 9 order" Questions

Ad

...Upper timing cover Turn the crankshaft two turns. Check that the markings on the crankshaft and camshaft pulley correspond. NOTE Check that the indicator on the belt tensioner is within the marked ...

Ad

upper cover [1]. 3. 4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3]. Remove: Crankshaft pulley bolt [4]. Crankshaft pulley [5]. Use tool No.09213-60017.

Ad

Question about Volvo V40

1 Answer

upper cover, timing belt lower cover. Turn crankshaft clockwise to TDC on No. 1 cylinder, slacken tensioner bolts 5 & 6. Move tensioner away from belt and lightly tighten bolts. Remove timing belt

...upper and lower timing belt covers. Position the crankshaft so that the timing mark is aligned with the timing mark on the engine. Verify that the I and E mark on the camshaft pulley align with the ...

...upper cover Turn the crankshaft pulley so cylinder No. 1 is at Top Dead Center (TDC). Align the pulley groove with the timing mark T of the timing belt cover. Remove or disconnect the following: NOTE ...

Question about Volvo V40

1 Answer

...upper and lower timing belt covers. 9. Turn crankshaft so that timing mark on timing belt pulley is aligned with timing mark on engine. 10. Check that "I" mark on intake camshaft pulley is aligned ...

...upper timing belt cover. 6. Rotate crankshaft until No. 1 cylinder is at TDC compression stroke and camshaft sprocket timing marks align with edge of cylinder head. "UP" cast on sprocket will be at ...

...upper toothed belt guard. 3. Bring camshaft gear to marking for TDC cylinder 1 by turning crankshaft. Marking on camshaft gear must be flush with marking on cylinder head cover, Fig. 4. 4. Loosen ...

Question about Volvo V40

2 Answers

...upper and lower timing belt covers. 9. Turn crankshaft so that timing mark on timing belt pulley is aligned with timing mark on engine. 10. Check that "I" mark on intake camshaft pulley is aligned ...

turn Clockwise to return the engine to TDC. Loosen the tensioner pulley center bolt. Apply 44 inch lbs. (5 Nm) torque to the tensioner pulley as shown and tighten the center bolt to 32-41 ft. lbs. (43

Not finding what you are looking for?
2000 Volvo V40 Logo

272 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Volvo V40
2001 Volvo V40

79 Questions

2003 Volvo V40
2003 Volvo V40

31 Questions

2007 Volvo V40
2007 Volvo V40

18 Questions

2004 Volvo V40
2004 Volvo V40

1 Questions

Top Volvo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...