what are the spark plug specs for 1999 s70 torque? Go snug plus 1/8th of a turn. That is how I was taught and have done for 35 years without issue.
Changing front wheel bearings 1997 F150 2WD How tight do these need to be...is there a specific torque that needs to be done or just make them snug. Can they over tightened? snug the bolt and put in ...
installed new spider injector. 1999 yukon 5.7 - now plenum vacuum leak I believe. It has a high pitched squeal when started and stops the second I shut it off. what is the torque sequence for the ...
My 2008 aveo5 is leaking what looks like oil. I looked underneath the car and it looks like it is leaking through the gasket on the engine that is to the left of the drainplug. That is if you are from
torque specs for timing cover and water pump on 1997 jeep grand 5.2 Snug. No need for a torque wrench. Snug is before REALLY tight. REALLY tight breaks bolts. it's a feel that you acquire.
valve cover tourqe nd sequence in my experience you always strart from the center & work out to the ends.snug all bolts just snug then begin torque sequence.
how tite do you tighten spark plugs on a 2000 chevy silverado? always use anti seize and crank to 10lbs which is like tighten down till stops and snug it a pinch. i thind its 14lbs, just seat them and
should there be some play in the seal of the outer hub bearing or should it be snug on the bearing for a 1993 toyota 4runner There should be zero play on the seal. It should be very snug. If it is ...
1991 ford country squire wagon... Reinstalling front brake rotor. How much do I tighten when reinstalling? Uses lock nut, castle nut and cotter key. Tks, Linda just snug the nut up but not so tight ...
spark plug torque settings 1998 ford escort se 2.0 auto lite double platinum "Snug". Really "snug", not overtight. Tighten it until you can feel resistance, then about 1/4-turn further. Spark plugs ...
459 questions posted
Usually answered in minutes!
664 Questions
232 Questions