1999 Volvo S70 "broken camshaft mean valves bent" Questions

...broken, then the belt being lose will have slipped a couple of teeth. Did you set the camshaft and crank alignment marks correctly before you fitted the new tensioner? If you did and it still won't ...

crank shaft won't move If thats the case, the crankshaft is broken, and the cars not worth fixing. If you mean the CAMSHAFT? the timing belt is broken, and IF any valves are bent, its not worth fixing

...camshaft position sensor can not tell the ECU to fire the coil pack. if you have a 2.4 dohc engine, i have never seen bent valves from a broken timing belt. i dont know what engine you have so that ...

camshaft]valves burnt/bent carbon build up [remove head and repair/replace valves ] valve springs weak/broken[repair or replace ] head itself cracked [replace ]these are some of the reasons that u can

broken. this means the valves are bent if this engine is an INTERFERANCE FIT ENGINE (meaning the valves stay held down by the CAMSHAFT and the PISTONS RAM into them). (normally only 3 valves BEND on a

...broken valves. Since, the 2000 Lincoln has a 4.6 litre V8 engine it will double over head cams. This mean each side of the engine on this V8 has it own camshaft. Also, Ford could have installed a cam ...

...broken timing belt [email protected] You won't need a manual unless you are going to tackle the job of replacing the belt. Most engines these days are known as "interference engines" - that ...

...camshaft is out of timing will it cause more than one cylinder to have no compression on a 2000 toyota solara 2.2L? what is the valve clearence on this engine? the teeth are worn off on the timing ...

...broken. If the camshft drive belt came off the engine while it was running you will have bent valves, this is due to the fact that this is what is called an "Interference" design engine, this means ...

...camshaft (which moves the valves) stops first, and the crankshaft (which is moved by the pistons during a "power stroke") continues to move. Any valves which are in the down position get hit by their ...