Question about Nissan Cars & Trucks
...brake light keeps burning out soon as it's put in. Disconnect the connector from the brake light switch at the pedal. Put in a fresh fuse. If it burns, you have a short in the red wire that runs from ...
does effect the brake lights because they all run on the same circuit. I would repiar or repalce all the wiring and then replace the brake light switch. The switch could have shorted out from the fire
...brake light switch. What else should I check? I also smelt a burning smell about a week or 2 prior to all brake lights going out. Make sure the brake switch is working. Leave it hooked to the wire ...
...BRAKE LIGHT SWITCH ! CHECK FUSES, CHECK ALL BRAKE LIGHTS , AND THERE CONNECTIONS, SOCKETS, BRAKE LIGHT SWITCH @ BRAKE PEDAL, MAY HAVE COME OUT OF BRACKET IT MOUNTS INTO ! SWITCH COULD BE BURN OUT ! ...
...brake lights then no running lights i have three wires orange,brown and white its on an 1983 jeep cj7 I think I found the problem, part of the high beam switch was burned, resulting in a loose ...
...brake light switch. If you have power there, the wire is broke from the switch to the S304 junction. If there is no power to the switch, the wire is broken between the fuse box and the switch. Please ...
probably check the fuse first, just because that's easier to check than for an old, fat man like me to crawl up under the steering column to check the brake pedal switch, which is my first inclination
...brake light switch in front of brake pedal. any suggestions what to try next have you checked the bulbs?. my next step would be to test for power at the brake light switch and then step on the pedal ...
...brake light switch mounted on the bracket right above the brake pedal. There should be power on the light green with red wire all the time. If there is no power check fuse 23 in the central junction ...
459 questions posted
Usually answered in minutes!
664 Questions
232 Questions
