1991 Volvo 240 "tail light circuit" Questions

...tail light. Any help be appreciated. Thanks Solder to the circuit board, just in case they interact with other circuits. On this website, you find wiring diagram taillights for Volvo 240 1991 Volvo ...

...light (driver side only)all work but no tail lights. Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct ...

...done this.... if so, can you send me a diagram of how you did this? I saw one on the net, but it was for a 1981 Volvo and did not show the brake/tail light connector. Any help be appreciated. ...

tail light problems My PC board is burnt out on the left side tail light. Can I replace only the PC board? Or do I need to replace the whole unit? Thank you Ryan Palmer You have 2 choices. Order a new

...light and tail light will not come on. The bulbs seem to be ok as well as the fuse. Try to wiggle the connector with the lights on. If they flash on while wiggling the connector, disconnect it and ...

...Tail lights, Heated mirrors: The 5th. is 16A for Brake lights, Shiftlock, ABS. You should check carefully to see which fuse is blowing and what circuits it controls. You are then able to trace those ...

...tail light connector wires I had to replace the little metal connectors that go into the plastic housing but didn't make a note on which color wire goes in which 1-8 slot ? Is this something you can ...

...light work Because use a Individual CIRCUIT. And signal from the Little MODULE Called. BULB FAIL SENSE MODULE. OK... I hope this help on your problem. Thank you for use fixya. This can be a wiring ...

tail light not working... left brake light does right tail light still works...... also went through lots of water and now engine management light is always on You should have the computer scanned for

...tail light. Now tail lights don't work and lights on dash are out! The Tail lights and Instrument lights are usually on the same circuit so both will go out if the fuse for the circuit blows. Check ...