...tail light. Any help be appreciated. Thanks Solder to the circuit board, just in case they interact with other circuits. On this website, you find wiring diagram taillights for Volvo 240 1991 Volvo ...
...tail lights but have run into a problem. Avoiding have to purchase replacement circuit boards for the lights. I have the wiring diagram for each once removing white connector. However, I am unsure of ...
...check at the plug and if you haven't done so then both the plug and connector wire ends should be soldered because sometimes they do not make a good connection with just a bare copper
tail light assembly, I am going to attempt another repair. This time, I intend to deposit solder on the contact or, perhaps, place a foreign object beneath the contact to hold it up. Since the contact
...checker relay. This gave me the same problems + headlight main beam trouble on one side. Got it re-soldered = cured! Saabs are finicky here. Try replacing all your tail lights at once and use bulb ...
...solder gets cracks and stop working. as for the tail lights take out the lights from the back hatch and clean the contacts. the wiper problem is probably in the stick switch itself. hope this
...with the bulb because it's pressed down and broke the plastic that work as an spring. I fixed soldering a piece of 22 cable from housing contact to bulb housing, is work for me for a long time, ...
...tail lights and dash lights wont work I would first pull the headlight switch out and look for a burnt connector to it. If the connector is burnt buy a repair connector for it and replace the switch ...
...Tail lights were working then I changed the bulbs then they stop working. I think the sockets arent any good. I need a little insight. Just cut one wire at a time on the old ones, That you don,t get ...
302 questions posted
Usually answered in minutes!
114 Questions
108 Questions
78 Questions
124 Questions
116 Questions