1998 Mercury Grand Marquis "replace power control switch" Questions

Ad

...Power window switch on driver control for front passenger window and front passenger window switch not working. Not sure if it is a fuse problem as all other window switches work from main driver ...

Ad

Question about Mercury Grand Marquis

2 Answers

...isn't broken then you need to replace your blower motor. With the ignition switch on, you should have battery power on fuse #9, which power up the EATC (Electronic Automatic Temperature

Ad

...control works ok & the air comes out of the appropiate places, IOW the floor vents, the dash vents, the defrost vents, etc. what needs to be done to this POC? The hot/cold switch is probably ...

Question about Mercury Grand Marquis

1 Answer

...Replace power steering pressure hose O-ring. Install the power steering pressure hose to the power steering pump fitting. Tighten the tube nut with a tube nut wrench rather than with an open-end ...

Question about Mercury Grand Marquis

1 Answer

...signs to keep engine running you could have a bad torque control switch.it should on the front of tranny behind radiator. unplug it and drive around if you have power then that switch needs

Question about Mercury Grand Marquis

1 Answer

...switch is not allowing power out, that means the refrigerant charge has leaked out to a level below what is needed to run. A simple recharge will fix this - at least temporarily. A large leak will ...

replace in the main control on the drivers door for my electric windows. It works for all the windows but the drivers window sometimes doesn't want to go down, or back up? Check the wiring you have an

...power and ground is present, replace the blower motor.  Otherwise, the problem is most likely a failed blower speed control module (VERY common).  The blower motor speed controller is ...

...back to the switch and pull it out and make sure that is sending power out if its not sendind power out replace the switch if you have power and ground at the actuator it indicates a bad actuator ...

Question about Mercury Grand Marquis

2 Answers

...power train control module) issue. If the PCM is faulty something will surely fail. First to consider is to replace the PCM if that's the case, but before proceeding please try this trick. Remove ...

Not finding what you are looking for?
1998 Mercury Grand Marquis Logo

593 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...