1991 Jeep Wrangler "remove slave cylinder" Questions

Ad

Question about Jeep Wrangler

2 Answers

Remove the bolts holding the slave cylinder to the transmission. Disconnect the hydraulic hose. Reconnect hydraulic hose to new slave cylinder, and install the slave cylinder in it's original position

Ad

remove the transmission to change the slave cylinder YES U DO THE SLAVE CYLINDER IS ATTACHED TO THE CLUTCH RELEASE BEARING. no but you may want to bleed it before you reinstall it the 1990 4.2L has an

Ad

...the slave cylinder just crack it open .pump the pedal as the fluid drops out to remove any air then close it .be sure the fluid level in the master cylinder did not go beyond the min when doing

Question about Jeep Wrangler

1 Answer

...slave cylinder or faulty clutch master cylinder unless you have oil on the clutch plate causing it to stick or a dry or seizing spigot bearing in the flywheel( possible ), there is no report from you ...

...slave unit i believe it may be leaking under the dash remove mats on drivers side and also lift carpeting look above the brakie pedal above the brake switch and see if there is any fluid in that area ...

...OR REMOVED THE SYSTEM HAS A CLUTCH MASTER CYLINDER @ FIREWALL AND A SLAVE CYLINDER @ TRANS THAT WORS THE THROW-OUT OR RELEASE BEARING IF COMING OUT COVER ON TRANS THIS WOULD MOST LIELY BE THE ...

Question about Jeep Wrangler

2 Answers

...slave cylinder you will have to remove the transmission as it has an input shaft mounted slave cylinder. If it comes to that make sure you get a new pilot and release bearing to install since you'll ...

...slave cylinder, put a hose on the bleeder valve and into a container with clean fluid and pump the clutch until no bubbles-close the valve and remove hose, check resovoir and top up--system is now ...

slave cylinder does this mount to the pass side on out side of clutch housing? have tube sticking looks like it mounts there , but looked slave cylinder on jeep site looks like something that would be

Question about Jeep Wrangler

4 Answers

...slave cylinder will fix the leak but nothing will do for a quick fix all you can do is keep the clutch fluid full up If the fluid is disappearing, then you should be able to find out where. If the ...

Not finding what you are looking for?
1991 Jeep Wrangler Logo

481 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...