1991 Jeep Wrangler "clutch pedal goes" Questions

Ad

Question about Jeep Wrangler

1 Answer

...clutch pedal I think the lingage might have broken on the clutch pedal. I have a shaft attached to the pedal about 3" long, that goes into the fire wall. How hard is this to replace and where can I ...

Ad

...clutch pedal going to foor I was driving this jeep the other day and clutched to downshift for a stop and the pedal went to the floor. The pedal is acts like it is disconnected as it will flop back ...

Ad

Question about Jeep Wrangler

1 Answer

Clutch Pedal to Floor Just got 'the call' from my daughter; the clutch pedal just goes right to the floor-no resistance at all-stuck in gear-does'nt this sound like the clutch master cylinder is out ...

...clutch should go to the floor =) But if it's not disengaging the clutch disk, there's definitely a problem between the pedal and the clutch disk. I'm guessing you have a hydraulic

pedal goes all the way to floor and still in gear YOUR CLUTCH IS NOT DISENGAGING. THERE COULD BE A PROBLEM WITH THE CLUTCH MASTER/SLAVE. CHECK FOR ACTION AT THE SLAVE. ALSO, A BROKEN PRESSURE PLATE ...

Question about Jeep Wrangler

1 Answer

...pedal travel. Your clutch system works the same as brakes do. The necessity to bleed tells you that there is a malfunction permitting air into the system. Check where the pedal rod goes into the ...

...Clutch pedal has lost pressure Clutch pedal has lost pressure and pressure point is now on or near the very bottom (floor). When last driven, it seemed the transmission was just beginning to slip. Is ...

...clutch pedal rod goes into the master cylinder. See if there is fluid running down the inside firewall. Next look at the bottom of the bellhousing to see if fluid has been coming out of it. That will ...

Question about Jeep Wrangler

1 Answer

...clutch pedal goes completely to the floor when i press on it without any resistance, making it almost impossible to shift gears. This happens 4 or 5 times each time i drive it. I have to pump on the ...

Question about Jeep Wrangler

1 Answer

...clutch Pedal and there is nothing, no response! First place you need to look is at the clutch master cylinder on the firewall next to the brake MC. Ifg it's empty then re-fill it and s5tart to look ...

Not finding what you are looking for?
1991 Jeep Wrangler Logo

481 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...