2003 Chrysler Town & Country "car stumbles 30 mph" Questions

stumbles when coasting and, when gauges worked, they read 30 mph and 1000 rpm. Other gauges all appear to work normal. Try output sensor for the transmission (it is similar to a vehicle speed sensor),

P0302 code cleared. Car still stumbles. I have a pending P0300 Random misfire code but nothing else. Need some help. Problem sometimes is with cheap parts they are bad.Good wires,good plugs,good coils

...car starts fine but after I start driving (automatic) and start to accelerate to around 30 mph it acts like it wants to stall until I give it more acceleration then picks up stumbling and making what ...

...the car runs but stumbles frequently. The alternetor seems new. Could it be bad ? check the voltage regulator, it is on the battery line right by the alternator if not the you need a new ...

...30 minutes. Suddenly, engine begins to stumble intensely and transmission down shifts to a much lower speed requiring me (if I'm lucky) to exit immediately. Also, check engine light energizes and ...

...30 mph or on the slightest incline at any speed the car starts to stumble and shake. Replaced Spark Plugs, wires, cap & rotor. Still same problem. Also installed another rebuilt Computer.TPO ...

...car stumbles, and while driving at highway speeds, in order to get over 60mph, you have to put the pedal to the floor. It is using more gas than it should too, but only while driving on the highway. ...

30 mph when i felt like the engine stumbled briefly. When I looked behind me all I saw was a cloud of white smoke. Pulled it over stoped and towed it back fired it up again later that day still smoked

...stumbles during acceleration After warming up the engines will frequently (but not always) falter or stumble during normal acceleration (no lead footing). It doesn't seem to happen when the engine is ...

...30 mph stumbles and hesitates. At 31 mph it's a rocket ! Many possiblities. I suggest taking to local mech and see what they say. I've had the same problem before and my problem was the distributor. ...