2002 Honda Odyssey "replace drivers seat" Questions

replace a 2004 Honda Odyssey drivers seat. (power). My manual says I need a 'seat removal tool'. What is this and how do I get one? what I need to do is get another seat from a salvage yard and remove

...replace the seat switch on the drivers side. My seat will slide every way but back. Occasionally it works after much perseverance. Do you have a solution or part number? it may be the seat motor ...

...looks to me that welded connection arm failed or wore out and the bar failed at that point. A replacement bar with the same welded connection arms would be great if they exist. Either way just ...

...seat belt should not be an issue, The car has a accelerometer in the computer if it is defective it would cause this problem, how ever it is common procedure if a car is in an accident to replace the ...

...seat is it possible to replace the plastic covering along the side of the seat where the controls are located. the plastic broke around the screws and it hangs down. it is taped now. Yes, that piece ...

...replace you will need to remove the drivers seat to gain access and be very careful not to drop new sensor. might get lucky and install and light goes off with no further action,but if not most ...

...seat cushion will not raise up and down anymore. What is the name of this plastic rod and how much does it cost to repair it. Also, can this be a DIY repair? If so where do we go to buy the part and ...

...and check the disc for scratches. If no disc comes out, then you are definitely going to need a replacement. If a disc comes out, check it for scratches and reinsert it if it looks ok (as it ...

...drivers seat and passenger seat all is fine . I will check under the hood today and will let you know if it that resolved the issue for the drl noise. possibly just the bulbs, but rare that two go ...

...drivers seat there should be a code there. If not, the only code they offered was a small card that had 3 stickers on it that came with the manual. Those three stickers were suppose to be placed in ...