...light assemble from underneth and replace the bulb. The cover is attached with a bunch of push on body clips, pry the button up with a screwdriver and pull out fastner. Then there are two screws ...
light bulb how to remove the bulbs. and replace just pull back on the deck cover on both sides and it just slips off. Then turn the bulb socket counterclockwise 1/4 turn and out comes the bulb -
...light? First, the bulb is a GE 158. There are two screws near the back of the parking brake cover (one each side). Move the seats forward to remove them. After removing the parking brake cover (helps ...
...light up deer eyes so much brighter, and so much farther out, that I have been far more aware of animals in and near the roadway since I've been using these. They are expensive but absolutely ...
...removing the 2 screws, go inside the cabin and the brake light housing pops up. 4.) disconnect the bulb from the housing while inside the cabin (I had to do this with me two forefingers since the ...
...bulb) or bad connections. If the warning light does light with the ignition switch on, but stays on with the engine running, check for a loose (or missing) belt, a loose or faulty battery cable, ...
343 questions posted
Usually answered in minutes!
347 Questions
225 Questions
104 Questions
55 Questions
54 Questions
