2005 Cadillac XLR "oil pressure" Questions

...oil pressure should be for the 4.2 engine oil pressure should be 12 psi @ 1200 rpm for the 5.3 oil pressure should be 18 psi @ 2000 rpm if oil pressure good problem in the oil pressure sending unit. ...

oil pressure alarm mean Means your engine oil pressure is low due to faulty oil pressure sensor which is located on top or the oil filter housing. It could also mean low on engine oil due to a leak in

Oil pressure sensor, or most likely, oil level sensor, either sensors, wires, or connections. The oil light comes on when the oil pressure sensor detects low oil pressure. The amount of oil has little

...OIL PRESSURE WILL CAUSE OIL PRESSURE SWITCH OR SENDING UNIT TO DISABLE FUEL PUMP.CHECK FOR OIL PRESSURE.REMOVE OIL PRESSURE SENDING UNIT  SCREW IN OIL PRESSURE GAUGE  TESTER INTO BLOCK ...

oil pressure light stays on .engine is running good .why is the light on? Check the oil pressure sensor and the wiring to it. Oil Pressure Sensor Removal & Installation 3.4L & 3.5L Engine To ...

...oil pressure switch is leaking oil with out removing the Intake manifold on a 2010 Hyunda Santa Fe 3.5L? locate the oil pressure switch: The oil pressure switch is usually located near the oil filter ...

OIL PRESSURE ...wHAT IS WARNING MESSAGE sTOP: OIL PRESSURE ...wHAT IS THE CAUSE Check your oil, it may be low if not the oil pressure needs checked. The sending switch could be bad or you have low oil

...oil pressure my engine idles at about 750 rpm with oil pressure about 100psi low oil pressure is 4 or 5 psi not 100.....did you oil pressure test or it is the truck oil pressure gauge ..I think the ...

...oil pressure sensor detects low oil pressure. The amount of oil has little to with it, although very low oil levels can cause loss of oil pressure. The best thing to do is to have the engine's oil ...

...oil pressure. I suggest installing a mechanical pressure gauge to verify if you do or do not have oil pressure. If with the mechanical gauge you do prove to have oil pressure then simply change your ...