1990 Cadillac Deville "reset park assist sensor" Questions

Question about Cars & Trucks

I replaced the 4 sensors the wiring harness and the module for the park assist on my 2011 chevy traverse but iam still getting service park assist on the dic. i did buy my traverse with rearend damage

...damage but its all fixed now except for the park assist. Probably needs the computer codes reset. Sensor on back out of aline or if it has a trailer hitch,,, its picking up the ball,,, take it ...

Question about Cadillac DeVille

1 Answer

On my 2010 Chevy Traverse, my "park assist off" message shows on the message screen. I press the reset button but does not turn park assist back on. What could be wrong?

...reset button but does not turn park assist back on. What could be wrong? The park assist issue started when I had the radio replaced. Would changing the radio have anything to do the park assist ...

Question about Cadillac DeVille

1 Answer

How do I get rid

...Park Assist" message cannot be erased or reset until the main cause of the problem is resolved. It will just keep on coming back. Let's say one or more of the park assist sensors are faulty, you ...

Question about Ford Cars & Trucks

2 Answers

Can't figure out how to turn off the Park Assist beeper on my 2005 Ford Expedition Eddie Bauer. It drives us nuts when we are trying to back up with our camper in tow.

...Park Assist On/Off. It looks like you should be able to toggle between them but I cannot find a control that does that. Parking Aid Navigator The parking aid system consists of the following: one ...

Question about Cadillac DeVille

2 Answers

The led panel over the

...RESET control to turn the rear parkassist ON or OFF. how Active Park Assist works: The driver activates the system by pressing an instrument panelbutton, which activates the ultrasonic sensors to ...

Question about Cadillac DeVille

1 Answer

I have a 2005 Mercury

...assist that I can find. I also disconnected the battery in hopes that it would reset the computer or relay connected to the sensors. Still do not work any help would be appreciated. Make sure the ...

Question about Cadillac DeVille

1 Answer

Reset factory mode on settings for 2010 Chevy Tahoe?

...after code read you can ask them to clear/erase which will reset settings / computer --with oark assist if dirt, debris, some one hitting rear bumper, towing/carrier mounted will shut off park ...

Question about Cadillac DeVille

1 Answer

I have a 2006 s60 and i had message on the dash that said my park assistance needs service. I noticed my button on the middle console isnt lighting up and when i back up my sensors are not responding

...park assist is a little module in the back left side of the trunk and the sensors in the back bumper. I wonder if you can pull a fuse to that system and reset it. It would be easy/cheap to just check ...

Question about Cadillac DeVille

1 Answer

I have a 2007 chevy

reset it. {: ) If the SERVICE PARK ASSIST message is displayed on the cluster, the on/off button will have no effect. It seems that the repairs was not fully completed. There is still a fault present,

Question about Cars & Trucks

2 Answers

2009 stabilitytrack comes on for a couple days unplugged abs and parking assist for a day or so plugged back in and drove for 1 1/2 hours will this reset any thing or not

...assist for a day or so plugged back in and drove for 1 1/2 hours will this reset any thing or not run the fault codes to see if there is a sensor problem. resetting without finding a problem really ...