1990 Acura Legend "lock car horn goes randomly" Questions

...lock broke, the car thinks it has been broken into once the alarm goes off. Mine started going off randomly when this lock broke. You have to reset the alarm system, with my 1990 Acura it was reset ...

lock the car again, and within minutes the alarm goes off again. Is there a fuse or relay I can pull to remedy this? I've done a computer reset and had to pull the battery cable a couple times

...Car battery is replaced. When I hit lock button on remote 2x the headlights don't flash and the horn doesn't sound. How do I troubleshoot and fix this? if you use the key to lock doors instead of ...

...car will randomly go off. it is running my battery down. sometimes it will go for months (not unless it goes off at night and then i dont know if it does) and not go off. then there are times that ...

...question that asks you if you want the horn to sound when you unlock/lock the doors. You need to hit the Step button so that there is a "N" instead of a "Y" and this should stop the horn from going ...

lock or unlock doors for about 60 seconds after, but then it goes back to doing the same thing. But if you try to honk the horn, it doesn't work at all. The horn did work before this problem occurred.

...horn and the parking lights flashing. All it takes for the alarm to be turned off is one of the doors to be opened. It does this a few times a day/night. Also, the doors will no longer lock using the ...

car is locked The alarm system has a sensitivity control and it needs to be turned down. This cannot be a factory alarm system? Can you clarify if its an aftermarket alarm or factory? If its a factory

...goes off while driving. I disconnected the horn for now but lights still flash. Any ideas? Is there a way to bypass this system? Thanks there is a short in the system somewhere then - should take it ...

lock nuts. You will have to pry the metal cover off of the airbag cover. Be sure to bend the prongs back in for replacement. Now, Use a pair of side cutters or your choice tool to cut the holders that