2000 Honda CR-V "wheel bearing noise" Questions

WHEEL BEARING AND AXLE HANGER BEARING NOISE STILL THERE NOT A TIRE ISUE ALSO IT IS A ALL TIME 4WD Did you check your Transmission fluid and your differential fluids make sure there up and I don't know

...noise from a diff is an indication of the gear mesh( pinion to crown wheel) is not correct. Several reasons being worn pinion bearings--loss of preload on the pinion bearings --- crown wheel carrier ...

right front wheel noise noise at front passenger side wheel when turning left It could be one of two things one it could be a wheel bearing or two it could be a linkage ball joint

...noise is still coming from front left side. Also have a little shake in steering wheel. It starts at about 30mph. 2 possibilities bearings or damaged rotor. Inspect the rotor, and you can jack the ...

wheel bearing problem ? Check for excessive play, and noise from both rear wheel bearings and hubs, with the vehicle jacked up and supported safely. Good Luck ! A FixYa rating would be nice...Thanks..

...wheel drive rear end noise IF YOU HEAR A CLUNK CLICKING OR KNOCK NOISE YOU HAVE LOOSE DRIVESHAFT BOLTS OR WORN UNIVERSAL JOINT BEARINGS. WORN REAR AXLE BEARINGS WORNED OR DAMAGED. Could be the rear ...

...doing a visual inspection. However, clicking noise when making turns is usually CV joints. Other possibilities ball joints and wheel bearings (would have to do an inspection to determine which is

Loose front wheel bearing? scraping noise on passenger side front wheel while turning, quiet when straight Here's how to fix.

rear differential noise during turn rear differential make noise during turn wheel bearing

...noise in the rear side, when steering wheel is spinned to one side /no matter left or right/ fully with acceleration. for example; when making U-turns. what would that knocking noise be? i heard from ...