2002 Cadillac Deville "install new tps throttle body" Questions

Ad

...new idle control sensor. No screw - fully computer controlled. Also, there is no idle control sensor - just a throttle position sensor (TPS) and an idle air control (IAC) motor. If you are replacing ...

Ad

Question about Cadillac DeVille

1 Answer

...new. its like 2 or 3 screws. no big deal. but needs to be calibrated per fsm. ill take a wild guess, 3.7L 3.7L Engine and 4.7. Remove air resonator tube at throttle body. Disconnect TPS electrical ...

Ad

...new. 4: The TPS is mounted to the throttle body. The throttle shaft end of throttle body slides into a socket in the TPS. The TPS must be installed so that it can be rotated a few degrees. (If sensor ...

...install the new TPS, position the front of the TPS at an approx. 45 degree angle downwards with the harness plug facing you, insert it into position, then twist back up until the bolt holes line up. ...

...Install a new gasket and the throttle body assembly. Tighten the mounting bolts to 16 ft. lbs. (21 Nm). Engage the potentiometer wire connector. Engage the vacuum hoses to the throttle body. Engage ...

...CONNECTOR AND REMOVE THE RETAINING BOLTS.INSTALL THE NEW TPS IN PLACE.MAKE SURE THROTTLE VALVE IS CLOSED.TORQUE RETAINING BOLTS TO 18 INCH POUND AND CONNECT THE TPS CONNECTOR THATS ALL YOU

Question about Cadillac DeVille

2 Answers

new 68mm blox throttle body installed on b16a. Since installation car has idled at 2000rpm. People say I need to adjust the tps, but looked it up and the tps is for adjusting sensitivity of gas pedal.

Question about Cadillac DeVille

1 Answer

...install a new tps sensor my car is a 1995 corolla 1.8 4 speed auto trans There are 2 screws that hold the TPS on to the side of the throttle body. Before you take the old TPS off, note where the TPS ...

...Install the New TPS: Position the new TPS in place, ensuring that it aligns properly with the throttle plate shaft. Attach it using the screws or bolts you removed earlier. Be cautious not to ...

Question about Cadillac DeVille

1 Answer

Install a new gasket and new studs if necessary. Install or connect the following: The throttle body assembly. Start the top nut by hand. The throttle body coolant hoses. Position the throttle control

Not finding what you are looking for?
2002 Cadillac Deville Logo

1,566 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...