1995 Cadillac Eldorado "kam" Questions

...eldorado codes are, 52 ECU ram chip error, deffective ECM, and code 109, Internal ECM problem (Kam checksum) can u tell me what they mean? It means your on board computer, or ECM, is faulty and ...

...................................... Open MAP Sensor SignalP109 (E109) ....... Keep Alive Memory (KAM) Reset/PCM has lost primary battery powerI052 ..................................................

Internal Control Module Keep Alive Memory (KAM) p0603 Internal Control Module Keep Alive Memory (KAM) Error P0603 means Internal Control Module Keep Alive Memory (KAM) Error In other words, that code ...

inspection rejection due to inop K,A,M inop kam (keep alive memory inop) recently rejected for sticker due to kam not operating. battery was not diconnected nor were any codes erased or eec test taken

where is the kam fuse on 1999 f250 it's be the pcm or computer fuse, if you've cleared a code and just need to reset the kam or keep alive memory. disconnect the battery for more than 1 minute but no ...

theft system light comes on , Car will not start you could possibly have the wrong key or the kam is bad kam is the keep alive memorry for the pcm if so take to dealer and have reprogrammed sorry they

2000 lincoln ls i got a trouble code p1633 (KAM)voltage to low does anybody know what this code means and a possible fix the check engine light is on and is has a rough idle and misses between 40 and ...

kam voltage lost memory The Keep Alive Memory (KAM) voltage to the onboard computer has been interrupted.  Either by a dead battery (for whatever reason) a disconnected battery, sombody pulled ...

check engine light come on and my fastpaq superchip diagnostic says internal com kam error what does this mean its a 2002 7.3 power stroke KAM= Keep Alive Memory. has the battery been disconeected? ...

p 0603 internal ctrl mod kam error what do I need to do to correrct or fix this It should clear itself if your batteries are good and the KAM fuse is good. It will reset every time you restart if ...