engine size so please use the appropriate diagram: GM (Cadillac) 250 (4.1L) V8 .GM (Cadillac) 273 (4.5L) V8 .GM (Oldsmobile) 307 (5.0L) V8 .GM (Oldsmobile) 350 (5.7L) V8 w/EFI.Engine firing order: 1-8
...diagram V8 engines as follows: 289,302,5.0L(Carb.) 390,406,427,428 400,460 (cyl numbers) Front (engine) 5 1 6 2 7 3 8 4 (firing order) 1-5-4-2-6-3-7-8 5.0L EFI 351, 5.4L, 5.8L (cyl numbers) Front ...
diagram for replacing the wires. Its the 8-6-4 engine Not sure what you mean by 8-6-4 but this will help you. Pick the correct one for your application: GM (Cadillac) 250 (4.1L) V8 .GM (Cadillac) 273
...get a quote from painless wiring they are on the web you just tell them what you are putting for an engine in what vehicle and they build you a harness fairly reasonable I believe in 300 dollar ...
...diagram and apparently, there are quite a few things that route to this fuse.
1.) Fuel Injectors, 2.) Mass Airflow Sensor, 3.) Oxygen Sensors (there are three of these), 4.) EVAP System, 5.) ...
...Wiring Information.
When Monitored: Ignition on and engine running with no MAP Sensor DTCs.Set Condition:
A large vacuum leak has been detected or the signal voltage for both TP Sensors is ...
diagram to the relays. I have a short in my inginition system, I am not getting any spart to the spark plugs?... and I have a relay that is buzzing? that is the ECU is bad, or fuel pump shorted. there
...diagram. I've put everything back in the right spot the second time and the engine started right up beautifully. However, a few days later, I ran into an another problem which could be related to the ...
...engine is cranking. though I don't recall it doing this before either so that may be normal. Someone told me that is how you know if your ICM is working cause it has a tach lead coming off it. 9) I ...
112 questions posted
Usually answered in minutes!
1,356 Questions
1,298 Questions
1,226 Questions
1,118 Questions
921 Questions