1997 Subaru Outback "change great wall head light" Questions

...great. Any ideas on how to do a quick fix on this problem? when you replaced the plugs , was one of them (cylinder 1 ) dirty and fouled ? I'm thinking that bad rings in cylinder would give you low ...

...great for about 10 days, and yesterday the coolant began to rise rapidly to the top of the expansion bottle, but did not overflow. Steam was venting from beneath the new radiator cap. The car has an ...

change. Ongoing now for about 6 months. The car does burn through oil about a quart every 500 miles although it is not blowing blue out of the tail pipe. How can I get it to run smooth again? Also the

...great again. it only took about 50 miles to reset, and the sensor cost me $35. People shouldn't guess - they should say "I don't know". As I just replaced my head gasket on my 1995 Plymouth Neon - I ...

...wall and around the piston to form a seal. Place a rag over each spark plug hole and spin the engine to eject the surplus oil. Then carry out a full compression test noting down the results. Here's ...

...change head gasket get head kit with valve cover and take head to machine shop to have shaved straight and checked for cracks Replace head with Remanufactured if warrpiage to great or stress cracks ...

great. Help please Doubtful. unless it is severely under sized. Make sure it has a full charge, and if you can put a volt meter on it while someone else tries to start it, see how low the voltage goes

...great care not to touch the new replacement halogen bulb as oil from your skin will burn when the bulb is turned on and may damage the glass, shortening the life of the bulb. Use a clean, dry paper ...

...change when i take the head cover off?? and or any diagram of such would be great!! thank you.. tom gustafson ok num. 3 cylinder would be the center plug on bank 1 whih would be the firewall side of ...