cykinder 2 and 3 missing subaru how many miles on it and has the spark plugs been changed. changed the spark plugs
...change the spark plugs to legacy 95 grand wagon? engine EJ25 thank's If it's a single overhead cam engine, which I'm guessing it is, all you have to do is remove the washer reservoir from the drivers ...
...spark plugs. However, periodically, the check engine light comes back on. The spark plug is again tightened and the light goes off. How do I keep this from happening? This happens about every 200 to ...
...the same. the spark plugs & wires have been changed. Any thoughts on the subject would be great. THX. take the head off and do a valve grind in ?? valve springs ?? weak broken .low
...SPARK PLUGS, RAN "SEA FOAM" THROUGH ENGINE. CODES SAY #4 INJECTOR. WHICH CYLINDER IS #4. WOULD AN INJECTOR FAIL THEN COME BACK TO LIFE THEN FAIL AGAIN? The cylinders are numbered as on the spark pack ...
believe that is what is causing my engine code P0303. Cylinder #3 misfire. I've already changed the spark plugs and wires along with a pcv valve. Here's a link on how to replace your coil pack
...plugs, wires, and tested the coil by disconnecting wires and seeing if there is a spark. Any ideas what could be the primary issue? fuel or electric related? go have your catalatic converter checked, ...
...spark plug in the one cylinder that I removed...also, broke the a/c belt tensioner so it has no a/c belt but that shouldn't make a difference did you replace all the plugs and did you get any wires ...
...not start; cranks, but won't turn over. We've had to pump gas to get it to start before. Changed plugs, wires, fuel filter, egr valve. Are you getting spark? Could be coil. Or just a new
...plugs. The problem still persist. What else can I do? O2 sensor. 99% of the time it's these. First, however, go to a parts dealer and ask to have the codes reset. Drive it for about 2-3 days. If it ...
378 questions posted
Usually answered in minutes!
447 Questions
411 Questions
381 Questions
317 Questions
328 Questions