1999 Jeep Grand Cherokee "rear end 1996" Questions

...Rear End of Jeep Grand Cherokee 1996 Vehical needed rear oil seals replaced. while doing this we also replaced the wheel bearings. after we drove it when we would reach 40 mph and above we could hear ...

...bearing Could be the pinion gear ,,Has it been leaking rear end oil? How many miles on this?Probly over a 100k? its old enough for it to start wearing out.Try changeing the rear end oil use

Rear end noise When I step on the pedal I hear the humming from the rear end, as soon as I let off the gas it quites down. If I need to replace the rear end what is a good estimate to replace? THIS IS

...rear end making alot of noise simular to a bad tore bearing, could the rear end need replaced? thanx hohn the rear end makes a grinding sound as you drive down the road.you apply the brakes and it ...

rear end is in my 1996 5.2 Grand Cherokee so I can change the fluid in it.(front and rear) I don't see what type has to do with it You can use Valvoline as example & if it says it will work in

...off rear end, removed pin and it will not come out!! can you help I had a 1996 jeep grand cherokee, I had to take the rear end cover off and to take the side axle bolt/pin out, to remove the side ...

rear end was making noice the whole time the jeep ran strong it had 150k is this problem big money to fix It's 12 years old,why would you consider it? Rear end noise,unless you do all your own repairs

...rear end is in a 1996 jeep grand Cherokee limited edition v8 rear end real axle? dana 44? read the FSM yet. it covers that type is hypoid gear sets. ...

rear end makin a scrubbin noise i replaced all brake parts still makin it check the rear u-joints and also check for play in the pinion bearing and yoke on the rearend

...rear end i already had the drive shaft rebalanced it happens at about 50 mph stops when you let off or give it gas i dont know. what do u think. check the barings in the rear end and on the axles see ...