1994 Jeep Grand Cherokee "1996 replaced" Questions

replace a crankshaft position sensor on a 1996 how to replace a crankshaft position sensor on a 1996 jeep grand cherokee. tools needed & step by step instructions for "non mechanic". THANKS 1st I ...

1996 jeep cherokee sport. How to replace the 1996 jeep cherokee sport. How to replace the heater motor? On a 96 model,the heater fan motor comes out through the engine bay.Take off the batt. ...

...1996 jeep grand cherokee 2 wheel drive. when i come to a stop the engine runs ruff and stalls after the engine is warm. i have replaced the fluid, gasket, and filter. I have been told that i need to ...

...is needed to replace the fuel filter? what special tool is needed to replace the fuel filter on the 1996 jeep cheroke grand? The things which you will need while replacing the fuel filter are G7399 ...

no spark to plugs 1996 jeep 4.0 no spark to plugs 1996 jeep 4.0 I replaced the coil allready HI, One possible cause is a bad Crank Position sensor or the connection to that sensor.

...1996 jeep grand cherokee acts like it is getting no gas and is going to die after pulling away from a stop have replaced fuel pump,ignition switch and also a new battery help!!!!! have you looked at ...

1996 jeep grand cherokee starts fine after driving for awhile will act like it is going to stall,checked and replaced everything could it be the tranny oygen senser is dirty replace it

can i replace the a/c comp with an idler pulley on a 1996 cherekee yes you can replace it you have to buy the whole ac compressor puller and a new belt then you have to recharge the ac unit with freon

i need to know how to replace a heater core in 1996 jeep grand cherokee loredo the dash has to be remove on jeeps and dodge,it's alot of work and thakes about 4 hours to replace good luck.

...a fuel pump in a 1996 Jeep Cherokee 4L V6? Fuel pump is located in the fuel tank.The tank has to be removed and then the fuel pump and sending unit removed. Then the pump is replaced. Does this