1990 Lexus LS 400 "timing marks" Questions

...timing marks on the cams and the crankshaft, This job is best left to a person that has a good knowledge of this engine or a better than average skill level. failure to install the timing belt ...

timing marks, ect. Have done many single cam v8 engines but never a dohc v8. with crank pulley white mark on 0 remove both cam pulley covers and verify yellow painted notches are exactly on the T mark

...timing marks on the camshaft timing pulley on both side are approximately one quarter turn from the timing marks on the rear plates. Could the force of the impact have cause the belt to slip? Yes, ...

...timing marks on the camshaft? How many times do I need to go around for crankshaft to achieve TDC, there is a notch on the crankshaft gear and the little ball on the oil pump, I turned the crankshaft ...

TIMING MARKS FOR VALVE TIMING diagram cam timing 1992 passat VW Hi If you can´t tell the diference between a Passat and a Lexus, I would leave fitting a cam belt to the professionals ! John.

when I set crankshaft on zero my camshafts dont match up My camshafts do not line up on timing mark together when I set crankshaft on zero.(can some one HELP me out ) Check to make sure Piston #1 ...

the spark plugs fire and gas is getting to spark plugs but no start make sure the spark timing is right. check the timing mark is correct.

crank and the cams sensors have to be on the the exact timing marks. When the belt gets old and start to stretch, it will pop the code. If you do it yourself, get a manual for it and follow it to a "T

I replaced the timing belt and water pump on my 1990 Lexus LS-400. Now it starts, but won't run. It will run on starter fluid. I have not yet filled the cooling system. U NEED TO FILL THE COOLING ...

timing belt cover, set crank to zero and make sure both cams line up with the marks on the engine) if thats all good the u have a prob with that particular cylinder. first thing I would do is swap the