1990 Lexus LS 400 "holding tank wiring" Questions

Why won't my car not turn over when I am trying to crank it? The car will act like it is trying to start, but it will not. check for spark from the spark plug wire pull the plug wire put a screw ...

holding a cover over the tank in the trunk. These screws are near the rear speakers.The pump is on the front of the tank and can be accessed by removing the rear seat. The bottom cushion is not bolted

will crank and run fine when engine is cold go for drive come back wont start, new battery1 will turn over just like no fire is getting through1 could be a number of possible faults.1/crank sensor not

overheats The engine is kept cool by a liquid circulating through the engine to a radiator. In the radiator, the liquid is cooled by air passing through the radiator tubes. The coolant is circulated ...

...tank you have to hold the tank up and remove the two bolts normaly a 14mm holding the strapped to your undercarriage then remove the filler neck and evap hoses and wiring harness then lower your ...

tank as well as the wiring harness 4 unhook the fill tank hose 5 lower the tank to the floor 6 remove the O ring that holds the pump in the tank 7 pull the old fuel pump out and put the new one in the

So, how do you correct the disconnected ground wire from the fuel tank to the chassis? Do I need to get an auto electrician to fix this problem? no, there is a seam round the sides on metal tanks put ...

...tank. it should have a wiring harness that has a blue retaining clip into it that keeps the fuel pump plugged up. there are 2 bolts that hold the straps that hold the tank up. the more fuel in the ...

...HOLDING THE TANK, BEFORE YOU COMPLETLY BRING IT DOWN CHECK AND REMOVE ANY HOSES OR WIRES ATTACHED TO THE TOP OF THE TANK. (BE CARFULL NOT TO PULL THE TANK DOWN TO QUICK OR HARD BEFORE REMOVING WIRES ...

...holding the tank in place then lower your floor jack (which should have never been removed) slowly take out the fuel pump carefully so nothing breaks off and stays in the fuel tank and replace ...