Question about Jeep Grand Cherokee
...1996 jeep grand cherokee lmtd. won't start did tune up. cranks but no fire. please help. engine code 54 shows up . cam shaft positioning no signal. . tested all circuit. changed cam shaft positioning ...
Question about Jeep Grand Cherokee
...1996 Jeep Cherokee. Random occurence. After sitting overnight won't start. Turns over but no hint of start. Can sit for a day or two and then start. Crank sensor replaced. Fuel pump tested. there is ...
1996 Jeep Grand Cherokee No Start Vehicle crank but no start /No Gauges No crank signal/ no spark -- replaced coil/ crank sensor. No Injector pulse signal at injector -- have cam sensor output signal.
No spark from coil probably crank sensor or cam position sensor my guess prob the crank sensor if u have tryed new coil first
1996 jeep grand cherokee 5.2. Sometimes will stall at red light. Turn off ignition and fires right back up. Also, misses when going up a hill. almost as if the power is being shut off. A FEW MISSES ...
...position sensor. It works off the rotation of the crankshaft. A mark on the cam passes the sensor every engine rotation and signals the to the main (BRAIN). Does the car turn over at all, or will it ...
...pump and the pump keeps running ...i am getting fuel but no fire the gauges wont even work... what would it be..please help check the cam position sensor. its located by the transmission bell ...
...1996 Jeep Grand Cherokee 6 cyl. Mine was the Camshaft Position Sensor. Only available at the dealership and cost $85.00 at the parts counter. Easy to install - remove the distributor cap and rotor. ...
1996 jeep grand chrokee turns over will not start, replaced cam shaft censor and ECM, and coil. distibuter cap looks bad has some white dust inside and contacts burnt. could it be that? If you did not
2,181 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions
