1992 Cadillac DeVille "timing marks" Questions

...position...in other words, the two timing marks are aligned. The drive pins on the 4 camshafts must be vertical or perpendicular to the cylinder head, ie 90 degrees to the cylinder head

...i replaced my new timing chain?????? Your best bet is to go buy yourself a haines repair manual for your car.It will have/show you the timing marks in there, and ALOT of other useful things as

...timing marks are in alignment and all 4 camshaft drive pinsare perpendicular (90 degrees) to the cylinder head surface. degrees) to the cylinder head surface. I hope this helps, if not let me ...

...timing marks asjacent to each other.Install crankshaft and intermediate sprockets over their respective shafts.  Rotating crankshaft as necessary to engage crankshaft key in sprocket without ...

...had someone replace the distributor on my 1995 Cadillac Deville and now won't start. Cannot locate timing mark on damper pully? How do I set the timing? Engine fires but won't start. Sounds like ...

Need to know what the degree the timing should be for a4.9 Cadillac Engine ? The 1991 Cadillac DeVille 4.9 engine incorporates a magnetic timing probe hole for use with special electronictiming ...

...shaftsprocket timing marks are in alignment and all 4 camshaft drive pinsare perpendicular (90 degrees) to the cylinder head surface. Here is the timing diagram Hope this helps Thanks

is lose and i dont know where its supposed to be Try tightening down, see if it will start, if not, rotate distributor small amounts and repeat. Once running check the timing marks with a timing light

...position...in other words, the two timing marks are aligned. The drive pins on the 4 camshafts must be vertical or perpendicular to the cylinder head, ie 90 degrees to the cylinder head

...timing marks on crank and timing gear are pointing towards each other and in alignment. Next make sure that the camshaft gear pins are pointing down and at 90 degrees to heads. Put chains back on. ...