2000 Suzuki Grand Vitara "remove valve cover" Questions

Ad

...Remove or disconnect the following: Negative battery cable Strut tower bar Intake Air Temperature (IAT) sensor connector Surge tank cover Air intake assembly Accelerator cable Transmission cable, if ...

Ad

...remove the valve covers 2.5 litre V6 24 valve to install a water pump no year,, now how can I get the pages for you lacking the year.
(that be the first question or VIN)
Guessing year 2000 for ...

Ad

Question about Suzuki Grand Vitara

1 Answer

oil cap It is on top of the valve cover. It turns counter-clockwise to remove. Use a funnel to add new oil. Remove dipstick, wipe clean, re-insert and check again for accurate reading.

Question about Suzuki Grand Vitara

1 Answer

...valve cover. other than changing the the gasket what can be done now that the top is removed in order to prevent from having this charge to me a second time around for something else. My 2003 Grand ...

...valve, bleed the master cylinder last.PRESSURE BLEEDINGClean the top of the master cylinder, remove the cover, and attach the pressure bleeding adapter. The spring-loaded plunger on the front of the ...

Question about Suzuki Grand Vitara

1 Answer

...valve cover to verify baffles were in place & not loose, checked for restriction in breather hose. everything was clean. I pinched off pcv hose & breather hose & test drove, still oil dripping out of ...

Question about Suzuki Grand Vitara

2 Answers

...remove the valve cover and check the oil baffles and filter therein. The problem is that oil builds up at the location of the PCV and is getting sucked into the intake via the vacuum hose to the ...

Question about Suzuki Grand Vitara

1 Answer

...Remove or disconnect the following: Negative battery cable Center console and transfer case shift lever, if equipped Transmission dipstick tube Transmission wiring harness connectors Starter motor ...

Question about Suzuki Grand Vitara

1 Answer

...br>the 2.5l V6 the EGR is in the back top of engine where people cant go easy...
but needs to be removed and cleaned, its an electric motor driven
EGR main valve , i do the MACRo failure ...

...remove/replace valve cover gasket on 2006 Suzuki grand vitara The below link may help. Its for a 2008, but I don't think it's different enough from a 2006. 2008 Suzuki Grand Vitara Valve Cover Gasket ...

Not finding what you are looking for?
2000 Suzuki Grand Vitara Logo

433 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...