2003 Mercury Mountaineer "remove replace rear brakes" Questions

Ad

...do I replace the rear wheel studs on a 2006 Mercury Mountainer? Take the wheel off,remove brake drum,hammer stud through axle hub,pull new stud through hub with lug nut until seated against axle

Ad

Question about Mercury Mountaineer

1 Answer

by the break pedal and touch the body of the car, or a loose wire or water in the rear of the car. The best way to diagnose it, is to remove both bulbs, replace the fuse and try it then get back to me

Ad

Question about Mercury Mountaineer

1 Answer

...rear wheels to keep it from rolling. 2. Disconnect the negative cable from the battery to remove voltage from the system. Don't want to arc yourself to the frame when you disconnect the cables from ...

...remove the drive shaft from the transmission [or transfer case if you have a 4WD model]. Be sure to place a catch pan under this area, as fluid will leak out once the nose of the drive shaft is ...

Question about Mercury Mountaineer

2 Answers

...replace the brake light bulb, and dont know how to..can someone tell me how Please don't forget to rate....thanks! Exploded view of the rear light assembly used on the Explorer/Mountaineer models The ...

Question about Mercury Mountaineer

3 Answers

...replace these parts is no where near 6000. For half of that, the complete, transmission can be replaced. Also note, There was a maintenance recall in 2004 for 2002-2004 models...Ford released a ...

Question about Mercury Mountaineer

1 Answer

...Remove the rear disc brake caliper (2552). For additional information, refer to Caliper in this section. Disconnect the brake hose. Remove bolt. Disconnect the rear wheel brake hose (2A442). Remove ...

Question about Mercury Mountaineer

1 Answer

replace the rear axle bearing REAR WHEEL BEARING/ HUB Removal Procedure Raise the vehicle. Refer to Vehicle Lifting in General Diagnosis. Remove the wheel and the tire. Refer to Tire and Wheel Removal

Question about Mercury Mountaineer

2 Answers

...replace as needed. Then remove the rear brake shoes and remaining hardware. Match the old brake shoes to the new brake shoes. Both sets should match up exactly. Then transfer hardware to new brake ...

...remove and clean and replace the rear brakes on a 2008Toyota yaris REMOVING REAR BRAKE DRUM SUB-ASSEMBLY 1. Release the parking brake and remove the rear brake drum. If the rear brake drum cannot be ...

Not finding what you are looking for?
2003 Mercury Mountaineer Logo

866 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...