...timing on 1994 chrysler labaron 3.0 why dose the cam keep moving when i set the belt the valve springs are pushing against the cam lobes and turning the cam, you have to hold them with special tools ...
...point, you're done. congratulations. Low battery. Is your battery fully charged? If you can get a jump, do so. If your car starts at this point, don't send your friend home yet. The battery was
timeing belt jumped time do i need anything oter than timeing belt to repair it car jumped time and wont start now replace timing belt and check all pulleys
...jump timming and now my car wont start so how do you time it #1 are you sure it jumped time?#2 how do you know this? if in fact it has jumped time you will need to have the timing belt replaced.the ...
how does it jump timing How does it jump timing the valve\cam timing can jump if the belt is worn or the tensioner is failing to keep the belt tight, also one of the pulleys may have a bad bearing
...timing belt needs to be replaced. Does the distributor still turn when you turn over the engine? If not then the timing belt is broke. Hope this helps. Remember surveys, thats what keep us here for ...
timing belt jump had to replace water pump and in doing so had to take out camshaft pulleys and timing belt etc. Putting timing belt back is a task in itself but when i put everything back and i mean ...
how does it jump timing The timing belt will stretch over time, as the motor runs, the belt can jump time, by the gear slipping a tooth on the belt.
...timing belt will jump time for several reasons, the belt dries out and the teeth strip off the belt, the tensioner or guide wear and fail, the belt can stretch over the years causing it to jump the ...
jump started the car and it ran until the jumper cables were removed. It died immediately. Still not thinking that spark had anything to do with anything at that point I removed the new alternator and
135 questions posted
Usually answered in minutes!
235 Questions
236 Questions
160 Questions
127 Questions
143 Questions