1999 Jeep Wrangler "wipers stay position" Questions

Ad

...wipers, radio and turn signals all stopped working. Checked fuses, nothing seems blown. Also, they all work when the ignition switch is in the accessories position, but when you turn the switch to ...

Ad

Question about Jeep Wrangler

1 Answer

...wipers turn off and stay in the upright position and do not close. The motor is fine. There is a steal 'close' tab that has been bent out of position. You just need to push the steal tab back into ...

Ad

...the wiper stalk down. The wipers will move into the service position.To get out of service position: To move the wipers back, switch on the ignition and tap the wiper stalk down. Bad park position

VW Golf 2001 Rear Window Wiper stays on. Back window wiper blade stays on? How can I fix that? Back window wiper switches/levers are tricky, especially on German-brand automobiles. Just make sure that

...windshield wipers work fine until you shut them off, they stay in upright position on windshield instead of down position You will need to replace the wiper transmission.This is a common

Question about Jeep Wrangler

1 Answer

...wipers stay on All functions on control stick work normal except when in off position wipers remain on with vehicle on. If I try to balance and hold the position between off and lowest delay then ...

...stay in vertical position when set on interrmitent Remove the wiper arms from the drive posts. Turn on your wipers with the engine running and shut the wipers off -- this will put the wiper drive ...

Question about Jeep Wrangler

1 Answer

...stay in the raised position when off. They work fine, just return to the 'up' position when I turn off. the circuit board in the wiper motor is at fault. It should be replaced just by removing the ...

they stay up my wipers stay up when turned off Look to see if their is a good ground from the wiper motor to the body of the car. If not, this wil cause the wipers not to return to their home position

Question about Jeep Wrangler

1 Answer

...stay on There are 4 positions to the wiper switch (OFF, AUTO, LOW, HIGH). If the wipers stay on even in the OFF position, then the self-park is not working and you probably have to replace the

Not finding what you are looking for?
1999 Jeep Wrangler Logo

641 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...