...The Airbag light stayed on also. Took to dealer - Cost $400 for them to replace the ignition. Fixed every
...turn off the wipers they stay in the up position. With the wiper switch in either the "intermittant" or full "on" position they still stay in the up(straight up) position. Its my daughters car , the ...
...for that.do you have any way to fix the problem.thanx for your help.john locate and replace the wiper relay.... on my van it was located in the fuse panel in the engine compartment near the
Question about Jeep Wrangler
wiper switch cannot turn any more. I mean the switch stays at OFF, cannot turn to any other levers. The one-touch wipers also not work. Windshield blades does not move at all. I would return it to the
...before turning themselves off. However, they do shut off when the vehicle is shut off. Is this an expensive problem to fix? no this is not an expensive problem. you just need the wiper relay
...turn off if I shut the car off, but now they come right back on). I have replaced a relay and the multifunction switch (that had other issues as well). The fuse looks fine. I have a new motor coming, ...
Question about Jeep Wrangler
...when turned off. I have a 94 Ford Taurus, The wipers stop in the up position. How can this be fixed? Thank You. With out looking at it this is just a guess I would look at the wiper
...to/Fix-Intermittent-Wiper-Problem-PHP. It is the only solution I have seen on this problem. Otherwise you need a new MFS-multi function- switch. I hope you feel my solution is very
...off instead of going down where they originally start they stay stuck pointed upwards The problem is the "Park position in the wiper motor has failed the fix os to replace the wiper motor
fix it? You need to replace the crank arm that is attached to the wiper motor. Then bend the tab back up on the wiper motor bracket that got bent when the crank arm went bad. The crank arm catches the
641 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
339 Questions
340 Questions