2004 Chrysler Sebring "change oil" Questions

oil light on while driving 2002 Sebring oil light was on while driving 2002 Sebring. Changed oil pressure switch and now oil light comes on at stop. what could it be? 2.7 ? This motor has oil problems

change oil filter and add synthetic? Also, should I just try to sell the car since it seems from all the reading, that my car is destined to a sludge death. Is there any way to avoid the sludge builup

...a 1997 Chrysler Sebring 2.5L V6 with the oil light coming on after warming up. The idle seems ok, changed the oil sending unit, worked ok for a day now the light comes on at idle after warming up. ...

To reset "change oil' indicator, turn ignition key to on, fully press gas pedal 3 times, turn key to off position and remove key. Next time you start the car, the 'change oil' indicator should be gone

Changed oil and oil light still on Oil light came on. Changed oil. Light still on. How do I get it to go off? Try disconnecting neg battery cable for 10 minutes, then plug back in. It should reset the

...check the oil for proper amounts, if the oil is past the 3000 mile mark,, have it and the filter changed , its probably telling you its low on oil though

...change oil message on your cluster. You need to press step until oil change mileage appears on screen and then just press reset. If you are inquiring about the oil pressure swith on the engine there ...

All the oil leaked out of my car when I start it. I changed the oil turned the car on and all the oil came out. The oil filter and oil pan screw were on nice and tight. when you changed the filter did

...oil longer if synthetic oil is used. Also some cars have a warning light that will indicate when the vehicle requires an oil change. Do not forget to check the oil often though if oil leaks

change oil" how do i turn it off? Try pressing the gas pedal all the way to the floor three times, be sure to turn the key to the on position with the engine off. Most oil change places should be able