2004 Chrysler PT Cruiser "start bad water" Questions

start?? Depending on how bad you overheated the engine you may have blown a head gasket and may be the cause of a no start situation. Pull the spark plugs out and look at them see if they come out wet

bad. to check your cooling fan circuit, start with the fuse box. Look for any blown fuses. Next check your fan itself, It should run when the engine is warm and also should come on with the A/C on. If

2003 PT CRUISER STARTS TO RUN BAD AS COOLANT IS INTRODUCED AFTER A WATER PUMP REPAIR try replacing coolant tempature sensor

...bad water pump that can be the radiator cap.. just replace it for a new one. and then if the problem continues make sure that the fan works well, if the fan do not start when is hot then change the ...

...start it I asked how it was running before she turned it off.she said it was running fine and that the only thing she could think of was she had went through a puddle of water and the belts were ...

BAD ONCE COOLANT WAS INTRODUCED TO THE SYSTEM AFTER WATER PUMP REPAIR. ENGINE STARTED AND RAN GREAT UNTIL COOLANT WAS INTRODUCED Could be as simple as "air lock" in the system. Remove the radiator cap

...bad head gasket with a possible leak between a cylinder and the water jacket. If fumes smell like coolant that would be a confirming hint. Check the oil (dipstick) and see if it has a milky colour or ...

...bad) and also check all hose connections there for leaks. Sudden no-start conditions are usually loss of either spark or gas to the cylinders. These are the first things to check when it won't

...Water is just condensation and is not to bad. The bluish smoke on the other is typical of lubricating oil coming through your rings and mixing with your oil and is exhausted through your valves as ...

...bad and stalling after about 1.5hrs running time. I replaced plugs, wires, coil, cam sensor, crank sensor and IAC valve(all these would come up on codes when it stalls. If I try to start it right ...