2003 Chrysler Sebring "obd ii wont connect computer" Questions

...OBD II code reader? if so then your car is not OBD II compliant. You need a GM OBD I scan tool. If it just isn't "talking" to the computer, then check for a blown fuse. usualy the fuse that ...

...Volts to the OBD II plug is blown. Usually on GM cars it is the same fuse as lighter. Labeled LTR on fuse block Driverside of dash between door and dash. door has to be open to see it. on end of ...

...shows what pins to check with a meter if you have power to the port then start checking your harness,connections and computers OBDII On Board Diagnostic System Does My Car Have OBD II The

...OBD II code reader. Please help! see if fuel pump is working...see if gas going . Save time take it to dealer and get them to dianose, may be lot cheaper than swapping out a lot of parts on hit and ...

...OBD II) to the car and pressed the read button & it said "no codes" Then I disconnected the plug that connects to the the coil packs. Then when I pressed the read button it still said ...

...OBD-II - Mass Air Flow (MAF) Circuit High Input This DTC means that there is a problem with the Mass Air Flow High (MAF) sensor or circuit. A more technical description would be that the MAF circuit ...

...OBD II connector cable doesnt have manufacturers pin connections.Have a funny feeling this problem is a concoction of different faults,but try checking gauze filter on bottom of pump in the fuel tank ...

...OBD II scanner in and get any codes that have popped up in your computer, if there aren't any, then my next suggestion would be to start checking into the ignition system, If you forced you key to ...

...any code with a OBD II reader. Try spraying carb cleaner in intake, see if it will start. It may be a fuel problem. Please let me know what you find. Get computer test get codes, possible bad fuel ...

...obd-II connector but it wont communicate with any of the diag programs I got with it,my computer can find it and connect with it, it just doesnt want to communicate. maybe I should have got the usb ...