2003 Chrysler Sebring "dodge 4 cam sensor problems" Questions

...4 cyl's. Have changed plugs, wires, & coils. Swapped dead cyl #1 injector with good running cyl #2 cyl #1 still dead Replaced cam sensor performed noid test all injectors noiding. Replaced plugs & ...

dodge ram 3.9 liter 4*2. getting p0340,p1391 and p0300,301,303,305 and 306 codes. Can someone help. thanks Change cam sensor & erase codes.( disconnect battery for a minute or so after.) 340 &

...dodge stratus with 2.4L have trouble code P0340. would like some info and possibly an electrical diagram also. Hi... The Code P0340 on your Stratus is : Camshaft Position Sensor Loss signal. Ok, The ...

Dodge Dakota "pick up coil" cam position sensor repeat failure 2.5L 4 cyl. engine works perfect then no start. Engine cranks but no spark. Dealer replaced cam pos sensor located in the distributor and

...dodge dakota 5.9 42-4400 rpm engine light comes on #4 misfire new plugs new wires new rotor new cam sensor. new distributior cap check your #4 injector it is most likely plugged with rust ( very ...

...dodge stratus 4 cyl it takes a lot of cranking to get it started and when it does the rpm gauge jumps like crazy & the car runs like sh** i have to keep pumping the gas to keep it alive and then ...

...dodge stratus 2.4 died on highway The coil only fires on #1 and #4. 2 and 3 do not fire at all. changed the coil with used one and same problem. could this be a wiring problem? Could be a wiring ...

...dodge neon 1996 4 cyl 2.o l When facing the engine compartment, the pcv valve will be located on the right end of the valve cover. It threads into the cover and will have a rubber hose attached also. ...

...dodge caravan 3.3 engine miss fire on cylinders 1 and 4. changed coil pak and still hsve the same issue. could the cam sensor cause this problem? I would put a scanner on the truck and see if any ...

...dodge stratus 4 cyl 2.4L engine the camshaft sensor is mounted on the camshaft housing located on the end of the cylinder head. behind the timing belt cover. Find the cam gear on the engine and ...