2003 Chrysler Sebring "ac problems" Questions

engine overheating when ac is on Ac fan switch is not comming on start the car and turn the ac on and see if fan comes on, if not it may be a relay sensor or a bad motor. If It comes on then look into

...now i'm trying to run a shorter belt do i have to remove the a/c? If its a 2.7L you can bypass the AC with no problem. Did it to mine 6 months ago. Left compressor in place. Little hard to find

AC problem The ac goes on and off randomly. I replaced the relay, the IOD fuse is ok. Many of the same vehicle does this. The ac low pressure is ok. What next Brian Could be the control panel or the ...

have a problem with my 2001 seabring. My AC is not working and I have been told that it is the clutch in the ac unit? Is this possible and can it be replaced? its very possible and it can be replaced ...

...switch has four speeds total. Blower motor only operates on high. What do I check? You need to replace the blower motor resistor... If your ac only operates on high and you never hear the ac blow

95 lebaron AC wont work...still! I have replaced the resistor, fuses, blower motor switch -and still no AC. the shop i took the car to couldnt find the problem and i have replaced everything as listed

Problem with the level of heat/ac blower only works on level 4, instead of 1,2,3. I have a problem with my low/hi 1,2,3,4 knob. On my 2001 chrysler sebring lx, when I turned on the ac to put it on low

...AC compressor. Water sloshing somewhere in back. Right wheel squeals unless I press brake. Rpm and mileage won't show up. How can I fix these problems in my 1997 Chrysler sebring thanks It's ...

1995 sebring lxi AC problem the ac in my car is acting real funny. i used redteck and followed the instructions to a T. used the sealer and refill i checked to see if there was presure in the system ...

2001 Sebring Seadan AC problem AC does not generate cold air. I checked and increased Freon and still same result. I replaced the A/C relay switch under the hood in fuse box and still not working. I ...