Question about Chrysler 300M
...Remove the crankshaft timing belt sprocket and key. Place the tensioner into a soft-jawed vise to compress the tensioner. After compressing the tensioner place a pin into the plunger side hole to ...
...pump on all models can be replaced without discharging the air conditioning system. WARNING: DO NOT REMOVE PRESSURE CAP WITH THE SYSTEM HOT AND UNDER PRESSURE BECAUSE SERIOUS BURNS FROM COOLANT CAN ...
...sprocket and remove the left intake and exhaust camshafts. Hold the sprocket and remove the right intake and exhaust camshafts. Remove the crankshaft sprocket. To Install: Install the crankshaft ...
...Remove camshaft sprocket from camshaft. To install camshaft sprockets: Place camshaft sprocket on camshaft. Install bolt and washer to camshaft. Using Spanner Tool MB-990775, hold camshaft sprocket ...
Question about Chrysler 300M
...Remove sprocket bolt and washer. d. Remove washer and install bolt into camshaft by hand. e. Position suitable three-jaw puller into intake camshaft sprocket relief holes and remove sprocket. Do not ...
...sprocket. Remove the 2 chain vibration damper mounting bolts. Remove the vibration damper Hold the camshaft hexagonal section with a wrench. Remove the sprocket mounting bolt. Remove the valve timing ...
...sprocket in position. Remove the nut. Remove the bolt, chain tensioner and spring. Remove the chain tensioner, oil pump sprocket and No. 2 timing chain. To install: Set the crankshaft key into the ...
...REMOVE THE SPROCKET ALONG WITH THE CHAIN,REMOVE 3 OIL PUMP MOUNTING BOLTS AND REMOVE THE OIL PUMP.REMOVE THE OIL PIPES OUT OF THE CRANKCASE. BEFORE INSTALLING NEW OIL PUMP, CHECK SEALS ON THE OIL ...
...remove the camshaft sprocket bolt and washer. Remove the camshaft sprocket. To Install: Install the camshaft sprocket on the camshaft with the retaining bolt and washer. Hold the camshaft sprocket ...
...sprocket counterclockwise to align marks and take up belt slack. NOTE: A new tensioner is held in the wound position by a pull pin. Remove the pull pin or Allen wrench from the belt tensioner. Once ...
1,408 questions posted
Usually answered in minutes!
395 Questions
313 Questions
272 Questions
170 Questions
107 Questions