1997 Chrysler Town & Country "remove radio" Questions

Ad

Question about Chrysler Town & Country

1 Answer

RADIO ;HOW DO YOU REMOVE FACE PLATE; 2002 T&C LIMITED (NOT INFINITY) Pull open the cup holder. Pry the little panel above the cup holder off. There are two screws you can now see. Remove them. Now

Ad

Question about Chrysler Town & Country

1 Answer

...1 or 6 and 2 (together) may display a Serial Number b> If not , then the radio will have to be removed from the

Ad

Question about Chrysler Town & Country

2 Answers

...for a 2005 Malibu classic there is a fuse at the back of the radio , remove the radio and replace fuse You may want to check this site Jeffry. Where is the fuse box located in 2005 Chevrolet ...

1997 Contact Chrysler and ask for your radio code , you will probably have to provide Radio type and model number and possibly serial number , to get these you will probably have to remove your radio.

Question about Chrysler Town & Country

1 Answer

...remove the bezel and radio Pop off the trim bezil on the dash, When you have it off there is 4 bolts that you take out , Plus 1 from the bracket on the radio, Then it should pull out, That you can ...

Question about Chrysler Town & Country

1 Answer

...remove the radio, that will allow you to find the plug on the back of the radio which connects to the wiring harness, make sure it is snapped all the way in. failing that you have a more complex ...

Question about Chrysler Town & Country

2 Answers

...the units had fuses on the back of radio. You will need to remove the radio and check for fuses. You said you check the fuse box under the hood. You know there is a fuse box under the dash too?

Question about Chrysler Town & Country

1 Answer

...the chassis and short circuit the radio, possibly causing a fire. Dealers are to remove the radio and apply protective tape to keep water out.Next Fuse location: 15 AMP#14DRIVER'S SIDE UNDER ...

Question about Chrysler Town & Country

2 Answers

...remove the amp from the back then the radio will probably not function at all. They are hard wired into radio itself. You must solder the new terminals back into the board if you change the amp. hope ...

Question about Chrysler Town & Country

2 Answers

...forward of the driver's side McPherson strut tower. There is a cover over the top which must be removed to see the fuses. Have you checked for power at the radio's electrical connector? You

Not finding what you are looking for?
1997 Chrysler Town & Country Logo

511 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...